How To Add Zmodo Beam After Doorbell Camera

Zmodo has a new setup method called 'Zink' for smart WiFi devices. If you lot accept purchased your product recently, it may accept been updated with a newer firmware that is compatible with the 'Zink' setup process. If you have one of the following products, your device may be uniform with 'Zink':

1) Pivot (ZM-SH86B001-WA)

two) Greet (ZM-SHD003B)

three) Smart WiFi Doorbell (ZM-CJAED)

4) Mini WiFi Camera (ZM-SH75D001-WA)

5) PT Photographic camera (ZH-IZV15-WAC)

6) WiFi Camera Kits (ZM-W0002, ZM-W003, ZM-W0004, etc.)

7) NVR kits with WiFi cameras

8) Beam (ZM-SHRZ01W)

If your quick guide instructs y'all to use 'Zink' delight follow these instructions to set up up your WiFi device. If your quick guide instructs you to use SmartLink, please skip to the "Using SmartLink" section to ready your device using SmartLink.

You may also view our Zink video tutorial for guidance on the setup.

Note: If you already have a Beam installed, yous will be able to set up your device using the "Automatic Connexion" setup method. "Automated Connection" uses your Beam to connect all of your 'Zink'-compatible WiFi devices in a few easy steps.

Using Zink:

i) Before yous brainstorm:

Make certain you have read the minimum requirements for your production. If you are connecting a Greet, Torch Pro, or a Smart Doorbell, you will need to complete the installation steps before configuring your product.

2) Download the free app and create a free account.

Download and open up the complimentary 'Zmodo' app from Google Play or the App Store and sign up for a free Zmodo account. Yous can create an account using a valid email accost (shown below) or a phone number.

If you lot already have a Zmodo account, please log in.

3) Open up the (+) Add Device menu and start the 'Zink' Setup Process.

Once you lot've logged into your account, you will exist taken to your Device List dwelling screen. Open the Add Device "+" menu on the upper right-hand corner and select the 'Zink' setup method. If y'all exercise non have a Axle already, select the 'Normal' setup option.

4) Connect to your phone to your WiFi device'due south wireless signal.

Your will exist prompted to connect to your device'due south WiFi betoken. Printing "Tap here to select WiFi" to become to your smartphone's WiFi settings folio, and select your device'due south WiFi signal. If you lot're connecting a Axle, connect to the SSID called "AP_ZMD". If you're connecting whatsoever other 'Zink' WiFi device, connect to the SSID called 'ZMD_SAP'.

5) Enter your WiFi information into the respective fields.

Enter the WiFi information (SSID and countersign) for the WiFi network that yous want your device to connect to. Please notation that y'all need a2.4GHz WPA/WPA2 password-protected WiFi network, and that your network proper name (SSID) mustNOTinclude spaces, and it mustNot be hidden. For case, "My Router" will notwork, merely "My_Router"willwork.

You tin can admission your router'southward settings to change your SSID.

'Zink' will automatically find and connect your device. The app may prompt you to connect to your WiFi network. If it does, please select "Tap here to select WiFi" and connect yous smartphone to your WiFi network. Once continued, you lot can return to the Zmodo app until your device is connected.

6) Proper name your device.

Once your Zmodo device is successfully connected, you volition be prompted to proper noun your device and set the timezone. You tin can select a unique name, or you tin can name it afterwards its location or function. Information technology is recommended that you set a device password for security. It will then ask you whether you want to share your device or not. Once these steps are completed, your Zmodo wireless device will be ready for employ!

Using SmartLink:

1) Earlier you begin:

Make sure you lot accept read the minimum requirements and accept successfully completed the installation portion of this back up folio. Connect your Android or iOS smartphone to the WiFi network that yous want to connect to your Zmodo wireless device (must be two.4GHz).

2) Download the free app and create a complimentary account.

Download and open the free 'Zmodo' app from Google Play or the App Store and sign up for a complimentary Zmodo account. You can create an account using a valid email accost (shown below) or a telephone number.

If you already have a Zmodo account, please log in.

three) Select the (+) Add Device option.

One time you've logged into your account, you lot volition exist taken to your Device List home screen. Select the Add Device "+" selection on the upper right-hand corner. A few in-app instructions will help guide you lot to prepare your Zmodo wireless device for network configuration.

Add Device

4) Enter your WiFi password.

Power on your device(s) and select the number of devices that you are going to configure. You volition be prompted to enter the password for the WiFi network that your phone is connected to. This will be the WiFi network that your Zmodo device will connect to. For your convenience, delight make certain that you enter your password advisedly and correctly (instance-sensitive). Please allow a few minutes for SmartLink to automatically find and connect your device to the WiFi network.

SmartLink Process

v) Proper name your device.

Once SmartLink has successfully connected your Zmodo device, you will be prompted to name your device and set the timezone. You lot can select a unique proper name, or you can name it after its location or function. It is recommended that you prepare a device countersign for security. Information technology will then ask you whether you lot desire to share your device or not. One time these steps are completed, your Zmodo wireless device will be ready for use!

Device Naming

Common Troubleshooting Tips

If your device isn't connecting to the wireless network, you lot may exist encountering some common and resolvable issues. Please try one of the following if yous are having trouble connecting your device:

ane) You may have entered your WiFi password incorrectly. Please reset your device. Wait for it to power back on, and retry the setup process in one case the LED is blinking green.

two) Your wireless signal may be too weak. In gild to improve your wireless point, delight refer to the FAQ on improving wireless signal strength.

3) Still having problem? Contact our friendly support team at support@zmodo.com.